50960025/CP0514
42
PRINTED IN U.S.A.
3.
The Exhaust Filter Indicator
and the Red Alert Indicator
in the exhaust filter gauge
will illuminate. The ECU
will further reduce engine
performance. Continuing to
operate the machine at this
level will set a “Service Only” soot
condition where the engine cannot clean the
exhaust filter itself. In this condition, perform a
Manual/Parked Exhaust Filter Cleaning. A
“Service Only” exhaust cleaning time can range
from 3 - 4 hours.
IMPORTANT:
Be sure the machine is parked in a
safe place and has an adequate amount of fuel to
complete a 3 - 4 hour exhaust filter cleaning.
PARKING BRAKE
NOTE:
The parking brake mechanism within the
front axle is not designed for, and not intended to
be used as, the primary means of stopping move-
ment of the machine. Hydraulic braking provided
through the service brakes within the axles is the
primary means for stopping movement. The axle-
by-axle split brake system is the secondary
means of stopping movement.
The proper sequence for correct machine operation is
to always engage the parking brake switch before shut-
ting off the engine; and to disengage the parking brake
ONLY after the engine is running. In an EMER-
GENCY, if it becomes necessary to STOP movement,
activate the parking brake switch to “ON.”
CHANGING ATTACHMENT TOOLS
The Telescopic Handler boom nose will accept Quick-
attach System Manitou Americas attachment tools. The
Quick-attach System has a quick-release hookup and
locking mechanism for mounting framing-type or
masonry-type attachment tools to the boom nose.
Attaching Procedure
To pick up the attachment tool proceed as follows:
1.
Raise the boom slightly, extend it two to three feet
(600 to 900 mm) for better visibility, and tilt the
Quick-attach System forward.
2.
Align the Quick-attach System squarely with the
back of the attachment tool.
3.
Slowly extend the Quick-attach System and lower
the hooks under the attachment tool hookup bar.
4.
Tilt the Quick-attach System back so that the lock
plate engages the attachment tool. This secures
the attachment tool to the Quick-Attach system.
5.
For an attachment tool with auxiliary hydraulics,
connect the hoses to the quick-disconnect connec-
tors on the boom nose.
Detaching Procedure
To detach attachment tool, proceed as follows:
1.
Raise the boom slightly and extend it two to three
feet (600 to 900 mm) for better visibility. Lower
the boom until the attachment tool is approxi-
mately 12” (0.3 m) off the ground.
2.
Tilt the carrier rearward as far as it will go. Once
the carrier is tilted back all the way, perform the
Mandatory Safety Shutdown Procedure (p. 9,
Safety
chapter).
3.
With the engine off, leave the operator’s station.
Manually raise the lock spring and flip the lock
plate up and outward at least 180
°
so it is in posi-
tion to re-lock on the next attachment tool.
Red
Quick-attach System Attaching Detail
Attachment Tool
Shown Locked to
Quick-attach
System
Quick-attach System Tilted
Forward for Hookup
Attachment
Tool
Содержание MT10044XT
