manualshive.com logo in svg

Manitou MH20-4 T BUGGIE 4ST3B, Руководство оператора, Страница: 98 / 114

Поделиться
Скачать
Manitou MH20-4 T BUGGIE 4ST3B Скачать руководство пользователя страница 98

3-34

H8 - LIFT TRUCK ON A PLATFORM

TRANSPORT

  Ensure that the safety instructions connected to the platform are respected before the loading of the lift truck 

and that the driver of the means of transport is informed about the dimensions and the weight of the lift truck 
(see : 2 - DESCRIPTION : CHARACTERISTICS).

  Ensure that the platform has got dimensions and a load capacity sufficient for transporting the lift truck. 

Check also the pressure on the contact surface allowable for the platform in connection with the lift truck.

  For lift trucks equipped with a turbo-charged I.C. engine, block off the exhaust outlet to avoid rotation of the 

turbo shaft without lubrication when transporting the vehicle.

LOAD THE LIFT TRUCK

- Block the wheels of the platform.
-  Fix the loading ramps so that you obtain an angle as little as possible to lift the lift truck.
- Load the lift truck parallel to the platform.
-  Stop the lift truck (see : 1 - OPERATING AND SAFETY INSTRUCTIONS : DRIVING INSTRUCTIONS 

UNLADEN AND LADEN).

STOW THE LIFT TRUCK

- Fix the chocks to the platform at the front and at the back of each tyre (fig. H8/1).
- Fix also the chocks to the platform in the inside of each tyre (fig. H8/2).
-  Stow the lift truck onto the semi-trailer with sufficiently resistant ropes. To the front by passing 

above the articulation fittings 1 (fig. H8/3) of the mast and to the back onto the towing 
pin 2 (fig. H8/4).

- Tighten the ropes (fig. H8/5).

H8/1

H8/2

H8/5

H8/4

2

H8/3

1

1

647448 

(20/05/2015)

Содержание MH20-4 T BUGGIE 4ST3B



















































































































Отзывы:

Нет отзывов