Manitou MH20-4 T BUGGIE 4ST3B, Руководство оператора, Страница: 91 / 114

3-27
G2 - FRONT WHEELS REDUCERS OIL
DRAIN
This operation should be carried out once a year if the lift truck has not reached 2000 hours
service within the year.
Place the lift truck on level ground with the I.C. engine stopped and the reducers oil still warm.
Dispose the drain oil in an ecological manner.
- Drain and change each front wheel reducer.
- Place drain plug 1 (fig. G2) in position A.
- Place a container under the drain plug and unscrew the plug.
- Let the oil drain fully.
- Place the drain port in position B, i.e. in a level port.
- Fill up with oil (see : 3 - MAINTENANCE : LUBRICANTS AND FUEL) by level port 1 (fig. G2).
- The level is correct when the oil level is flush with the edge of the hole.
- Refit and tighten the drain plug 1 (fig. G2) (tightening torque 60 to 70 N.m).
G3 - WHEEL NUTS TIGHTENING TORQUE
CHECK
- Check the condition of the tyres, to detect cuts, protuberances, wear, etc.
- Check the tightening torque of the wheel nuts with a torque wrench.
t'SPOUUZSFT /Nœ
t3FBSUZSFT /Nœ MSI20 T 4ST3B
MSI25 T 4ST3B
MSI30 T 4ST3B
MH20-4 T BUGGIE 4ST3B
MH25-4 T BUGGIE 4ST3B
t3FBSUZSFT /Nœ MSI35 T 4ST3B
G2
1
B
A
647448
(20/05/2015)