manualshive.com logo in svg

Manitou MH20-4 T BUGGIE 4ST3B, Руководство оператора, Страница: 59 / 114

Поделиться
Скачать
Manitou MH20-4 T BUGGIE 4ST3B Скачать руководство пользователя страница 59

2-37

TOWING PIN AND HOOK

Located at the rear of the lift truck, this device is used to attach a trailer. Its capacity is limited for each lift truck by the authorised gross 
vehicle weight, tractive effort and maximum vertical force on the coupling point. This information is given on the manufacturer’s plate 
fixed to each lift truck (see : 2 - DESCRIPTION : IDENTIFICATION OF THE LIFT TRUCK).

- To use a trailer, see current regulations in your country (maximum running speed, braking, maximum weight of trailer, etc.).
-  Verify the trailer’s condition before using it (tyre condition and pressures, electrical connection, hydraulic hose, braking system…).

  Do not tow a trailer or accessory which is not in perfect working order. Using a trailer in poor condition may effect the lift truck’s steering and braking, and hence 

safety.

  If a third party helps in coupling or uncoupling the trailer, this person must be permanently visible to the driver and wait until the lift truck has stopped, the 

handbrake is on and the I.C. engine is switched off before performing the operation.

A - TOWING PIN

COUPLING AND UNCOUPLING THE TRAILER

- To couple the trailer, position the lift truck as close as possible to the trailer ring.
- Put the handbrake on and switch off the I.C. engine.
- Remove the clip 1, lift the trailer pin 2 and place or remove the trailer ring.

  Be careful not to get your fingers caught or crushed during this operation. 

Do not forget to put clip 1 back in place. 
When uncoupling, make sure that the trailer is supported independently.

2

1

647448 

(20/05/2015)

Содержание MH20-4 T BUGGIE 4ST3B



















































































































Отзывы:

Нет отзывов