background image

2-31

BASKET CONTROL STATION

21 - 

E

MERGENCY

 

STOP

This red mushroom-shaped button is used to stop all movement from the control 
panel in the case of problems or danger.

 

- Press the emergency stop button to stop all movements controlled from the basket 

control panel.

 

- Turn the button a quarter turn to the right to re-enable power (the switch will 

automatically return to its initial position).

In all cases, this control has priority, except when movements are 
being made from the emergency and ground maintenance station.

Do not use the emergency stop to simply shut down the lifting 
platform. Otherwise, rearm it immediately as no action can be 
performed on the ground maintenance station and the basket 
command station.

To return to the ground even if the basket emergency stop is 

engaged, use the emergency and ground maintenance station (See 
“Rescue procedure” in section 2).

22 - O

VERLOAD

 

LAMP

 

AND

 

VARIATOR

 

DEFECTS

- THIS LAMP HAS TWO FUNCTIONS :

 1  - If the basket is overloaded, the LED flashes intermittently (See : ACCESS PLATFORM 

OPERATION – SAFETY INSTRUCTIONS).

 2  - In case of fault, the number of flashes indicates the type of fault detected by the 

variator (See: 4 - Lamp“MAINTENANCE MACHINE” p 2-17).

23 - S

LOPE

 

LAMP

 

- When the access platform has reached the maximum authorised slope the LED flashes 

intermittently See : ACCESS PLATFORM OPERATION – SAFETY INSTRUCTIONS).

24 - S

OUND

 

ALARM

 

HORN

 

- When button 24 is pressed, it activates the sound alarm horn 19 located on the turret. 

21

22

23

24

647536 

(10/04/2017) 

150 

AETJ 

/ 170 

AETJ 

L

Содержание 150 AETJ C





































































































Отзывы: