Manitou 100 SC-2, Руководство оператора

Страница: 48 / 104

2-14
LIFTING PLATFORM OPERATION
D
ESCRIPTION
- This machine is a mobile personnel lifting platform. It comprises a work platform fixed on the end of a scissors assembly.
- MANITOU lifting platforms are solely intended to be used to carry people, with their tools and supplies (up to the authorized weight
limit: see the “SPECIFICATIONS” section), to the desired working height, to reach difficult to access areas over installations and buildings.
- The machine is fitted with a control station in the basket. From this, the operator can drive and operate his machine in a forward and
reverse direction. The operator can raise and lower the scissors assembly.
- The lifting platform is also fitted with a ground maintenance and emergency station, from which all the lifting commands can be made,
except for translation commands. The base controls are only to be used for rescue purposes, to bring the operator back to the ground if
he is incapable of returning there himself.
- The operator must check on a daily basis that the ground maintenance and emergency station controls, and then the basket controls,
are working correctly.
Stickers showing the characteristics, safety warnings and the rescue procedure are affixed to the machine. The operator
must read these and fully understand their content. To avoid any risk of wrongly interpreting the pictograms, please refer
to the paragraph “SAFETY STICKERS” Section 1 – SAFETY INSTRUCTIONS AND ADVICE.
- The lifting platform’s movements are provided by a hydraulic pump operated by the IC engine. The hydraulic components are controlled
by electro-valves actuated by means of contactors on the control joy stick.
- The controls on the base console, operating via contactors, are either in ON or OFF MODE.
- The base console is fitted with a so-called “Dead Man’s” push button (9*). This must be pushed in at the same time as the contactor is
pressed. Releasing it stops the manoeuvre.
- The lifting platform is a four-wheel drive machine driven by an IC engine. The drive wheels are fitted with spring brakes with hydraulic
release. These brakes activate automatically as soon as the translation joy stick is returned to the Neutral position.
- The lifting platform can lift within the limits of its capabilities (see “SPECIFICATIONS” in this section). A load equal to or less than the
maximum capacity in the basket enables you to move into any position provided that the machine is on a surface with a slope of no more
than the maximum authorised inclination.
G
ENERAL
- On the following pages, you will find all the information you require for using the machine. This included the procedures for using,
driving, parking, loading and transporting the lifting platform.
647367
(01/03/2017)
100/120
SC-2
/ 140
SC