Manitou 100 SC-2 Скачать руководство пользователя страница 102

Страница: 102 / 104

3-30

H - OCCASIONAL MAINTENANCE

H1 - Fuel feed circuit (*)

BLEED

H2 - Wheel

CHANGE

For this operation, we recommend that you use the MANITOU hydraulic jack,

Reference 505507, and the MANITOU safety stand, Reference 554772.

- If possible, stop the platform on a stable, level surface.

- Proceed to stop the platform (see: 1 – SAFETY INSTRUCTIONS AND ADVICE: DRIVING INSTRUCTIONS WHEN LADEN AND UNLADEN).

- Chock the platform in both directions on the axle opposite the wheel to be changed.

- Loosen the nuts on the wheel to be changed until they can be removed quite easily.

- Set the jack on the axle carrier as close as possible to the wheel and then adjust the jack (Fig. G2/1).

- Lift the wheel until it detaches slightly from the ground and set the safety stand under the axle (Fig. G2/2).

- Fully loosen the nuts on the wheel and remove them.

- Release the wheel by moving it to and fro and roll it to one side.

- Slide the new wheel on to the hub.

- Screw up the nuts by hand and grease them if necessary.

- Remove the safety stand and lower the machine using the jack.
- Tighten the wheel nuts with a torque wrench.

*(Contact your dealer)

647367

(01/03/2017)

100/120

SC-2

/ 140

Содержание 100 SC-2









































































































Результаты поиска

Содержание 100 SC-2

Отзывы:

Похожие инструкции для 100 SC-2

Бренды по названию

Популярные бренды

Manitou 100 SC-2, Руководство оператора

Результаты поиска

Содержание 100 SC-2

Отзывы:

Похожие инструкции для 100 SC-2

Бренды по названию

Популярные бренды