M&R i-Image S Скачать руководство пользователя

Страница: 56 / 62

M&R Companies 440 Medinah Rd. Roselle, IL 60172 USA

Tel: +630-858-6101 Fax: +630-858-6134

www.mrprint.com

| store.mrprint.com

V.120617

Every 6 Months

WARNING:

To prevent possible injury to personnel and/or damage to the equipment, lock

out and tag the electrical service to the equipment.

Lubricate Linear Bearings

Items required:

1 - White Lithium Grease (M&R Part No. 7018017)

1 - Standard pump action grease gun (M&R Part No. 5019078)

1 - Nozzle Extension (M&R Part No. 3030051)

Using a standard pump action grease gun, apply 1 or 2 applications of grease to the grease fittings (1) (front and
rear) on

both

sides of the screen frame.

Replace Main Ink Pump Filter

Items required:

1 - Main Ink/Flush Filter (M&R Part No. 7990002)

1 - Rubber gloves

1 - Lint Free Rags

Printheads rely on clean filtered ink for optimum performance.

Shutdown machine as described in this manual.

The Ink pump filter (1) is located in the base of the i-Image S attached to the K ink pump. Unscrew the
connections on the top and bottom (2) and replace with a new filter. The filters are uni-directional. Install
with the arrow (1) up.

Содержание i-Image S































































Результаты поиска

Содержание i-Image S

Отзывы:

Похожие инструкции для i-Image S

Бренды по названию

Популярные бренды

M&R i-Image S, Руководство пользователя

Результаты поиска

Содержание i-Image S

Отзывы:

Похожие инструкции для i-Image S

Бренды по названию

Популярные бренды