M&C EC Series, Инструкция по эксплуатации, Страница: 10 / 41

10 ECM-ExII | 1.02.00 www.mc-techgroup.com
8 Introduction
The
M&C ECM-ExII
gas cooler unit is designed to operate whenever there is moisture interference in
the sample gas.
Lowering the sample gas temperature to a very low and stable dew point prevents condensate built-up
in the analyser and avoids unstable measurements, because of water vapour cross-sensitivity or
volumetric errors.
The ECM-ExII is certified for appropriate use in the specified Ex zones noted in the Type Examination
Certificate.
Only operate the ECM-ExII according the specifications stated in this instruction manual
and in the extended manufacturer documents.
8.1 Serial number
The type plate with the serial number is located at the right hand side panel of the cooler housing (wall
mounting version).
Please refer to this serial number if you have any questions about your ECM-ExII or if you need to order
spare parts or consumables.
8.2 Power supply
The cooler can be operated with AC voltage in the range of 110 V to 240 V, 50 to 60 Hz.
8.3 Patent references
The M&C sample gas cooling device is patented under the following patent number:
• Germany 199 57 052
• USA 6.477.851