M&C CG Series, Инструкция по эксплуатации

Страница: 15 / 35

www.mc-techgroup.com CG-2 | 1.04.00 15
9 TECHNICAL DATA
Converter Series CG
®
CG-2 CG-2M CG-2H-W CG-2MH-W
Part-No. Converter 50A1600(a) 50A1500(a) 50A1900(a) 50A1920(a)
Part-No.Converter cartridge Type
C Carbon-Molybdenum
95A9003
Part-No.Converter cartridge Type
SS metallic Filling
95A9004
Gas inlet and
–outlet non-heated
(cold) or heated (hot)
Non-heated Non-heated Heated Heated
Bypass solenoid valves -------- 2 x -------- 1 x
Gas inlet temperature Max. +80 °C [176 °F],
dew point
“dry“
Max. +250 °C [482 °F],
dew point <160 °C [320 °F]
Temperature range, adjustable Max. 680 °C [1256 °F]
Gas flow rate 30 to 60 Nl/h, max. 90 Nl/h
Operating pressure Max. 2 bar abs. (pressure deviations only with max. 0.1 bar/min)
Warm-up time Approx. 30 min.
Volume of the converter cartridge Approx. 35 cm
3
Operating temp. converter car-
tridge type
C
Min. 320 °C [608 °F] typ. 350 °C [662 °F] max. 380 °C [716 °F]
Operating temp. converter car-
tridge type
SS
Min. 620 °C [1148 °F] typ. 660 °C [1220 °F] max. 680 °C [1256 °F]
Max. NO
2
concentration 200 ppm (type C), 2000 ppm (type SS) at new catalyst
Conversion rate NO
2
in NO Effectiveness > 95 % for a new catalyst
Service life of the NO
2
/NO catalyst Change as a preventive measure every 6 months for type C**
Change as a preventive measure every 12 months for type SS**
Differential pressure < 20-60 mbar depending on type
Ambient temperature + 10 to + 50 °C [50 to 122 °F]
Storage temperature
- 25 to + 65 °C [-13 to 149 °F]
Relative air humidity < 80 %
Connection sample gas inlet and
outlet PVDF-fitting G1/4 i DIN 228/1 ø6 mm tube fitting, 1.4571*(316Ti*)
Power 230 V 48-62 Hz
or 115 V 48-62 Hz (a)
230 V 48-62 Hz
or 115 V 48-62 Hz (a)
Power consumption 520 W 620 W 940 W
Electrical connections Mains power plug connector incl. 2 fine fuses 5 x 20 mm,
230 V / 3.15 A
TT
or 115 V / 6.3 A
T
,
2 m [approx. 6.56 ft] cable with shockproof plug.
Alarm- and control signals 9 pin Sub-D-connector
Status signals for temperature 1 Contact potential free, max. contact rating 24 V, 1 A
Material of sample contacting parts Stainl. Steel SS316Ti, PTFE, FPM, PVDF Stainl. Steel
SS316Ti, PTFE,
FPM, PVDF, alu-
minium hard-
coated
Degree of protection IP20, EN 60529
Housing 19" rack mounting,
3U, depth 350 mm
[13.78”]
Wall mounting,
height 350 mm
[13.78”], depth 3U
Weight Approx. 6 kg [13.23 lb]
Electrical equipment standard EN 61010, EN 60519-1
Option for CG-2 and CG-2M Mounting bracket, 3U
– 84HP, Part No.:
50A3000
* Standard ø 6 mm connection,
optional ø ¼“ – please indicate with order.
** The indicated service life of 6 respectively 12 months is the minimum service live of the catalyst material under
normal conditions and in not highly corrosive, reducing or oxidizing atmospheres. The operator is responsible for
checking and, if necessary, adjusting the life cycles.