Ref.: WB-VL-SM Ver.1 3.doc
27
4.8.
LASER & TORCH SETTING
(Applicable for model)
After entering into the
OPTIONS
, select the Laser Torch button. Following screen will
be displayed:
Fig. 52
Use
/
keys to select the required option and then press
key to turn on of turn
off the feature.
4.9.
DUTY CYCLE TEST
1.
Once Duty cycle test is selected, press
twice to run Wheel. Ensure the Duty
cycle of 40-60% RPM of Rotor (LCV: 175 -5/+15RPM, HCV: 200 -5/+15RPM)
are displayed in the window:
Fig. 53
2.
Duty cycle should not be 00 at any condition & reading should not jump also.
3.
Press
key twice to return to
OPTIONS
.
4.10.
KEYPAD TEST
1.
Once Key test is selected, following screen will be displayed:
Fig. 54
2.
Press a key in the Keypad and ensure the respective key in the screen blinks
followed by Audio indication.
3.
Press
twice key to return to
OPTIONS
.
Содержание LX WB-VL-65 DSP
