RADIORE901
RADIORE901
- Universal Receiver
- Universal Receiver
Replacement and Programming Instructions
Replacement and Programming Instructions
Receivers: Compatibility and Replacement
The
RADIORE901
Radio Receiver is compatible with the Manaras-Opera Series “0” and “900” Fixed Code (Dip
Switch Technology) Radio Control Lines as well as the Series “100” Rolling Code Technology Radio Control Line.
Replacement Product
Discontinued Products
U
n
iv
e
rs
a
l
R
e
c
ei
v
er
RADIORE901
Universal Receiver
•
Compatible with both Rolling
Code and Fixed Code / Dip
Switch Technology.
•
Controls 1 Operator.
•
Easy installation on wall close
to operator or directly onto
operator's control box.
•
Nema 1 enclosure (N4 option
available - RADIORE901B).
•
Operates on 24V
AC
/V
DC
.
•
LED indicator.
•
Includes 2 mounting screws and
anchors.
•
Optional commercial antenna
(RADIO029) and 15' coaxial
cable (CABLE015) available for
increased range and distance.
Fixed Code / Dip Switch Technology
RADIO014 (MR-1000) /
RADIO015 (MRX-1000)
•
Controls 1 Operator.
•
Installed directly onto operator's control box.
•
Includes commercial antenna for increased
range (RADIO015 / RADIORE900A).
•
Operates on 24V
AC/DC
.
•
LED indicator.
RADIORE900 /
RADIORE900A
RADIO031 (MCR-32 N4) /
RADIO037 (MCR-32) /
RADIORE900B
•
Controls 1 Operator.
•
Nema 1 enclosure (RADIO037), Nema 4/12
enclosure (RADIO031 / RADIORE900B).
•
Includes commercial antenna.
•
Operates on 24V
AC/DC
.
Rolling Code Technology
RADIOKIT005
•
Controls 1 Operator.
•
Operates on 24V
AC/DC
.
➢
Replacing RADIO014/015/031/037 Receivers with a new RADIORE901 Receiver and
Pairing it to an Existing Transmitter:
1. Make sure the existing transmitter is set properly (refer to the Transmitter's Technical Note).
2. Press the
LEARN
button on the RADIORE901 receiver. The
RED LED
will
BLINK
. You will have 15 sec. to
complete the pairing or you will need to restart.
3. On the existing Transmitter, press the desired
Button
that you wish to pair.
4. The
RED LED
will stop blinking. The RADIORE901 has now been paired with the existing transmitter.
5. Only one transmitter needs to be matched per receiver. The other transmitters with the same dip switch
configuration will pair automatically.
➢
To Delete All Transmitters from the Receiver's Memory:
1. Press and
HOLD
the
LEARN
button on the RADIORE901 receiver until the
RED LED BLINKS
(approx. 10 sec.)
(frequency of 1/3 sec. ON / 1/3 sec. OFF).
1-800-361-2260
1
TN1051 REV 0 - 2018/12/03
