manualshive.com logo in svg

Man D2842 LE103, Руководство по эксплуатации

Поделиться
Скачать
Man D2842 LE103 Скачать руководство пользователя страница 23

General Safety Instructions

MAN-Industrial diesel engines D2842 LE103

23

Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions 
and the safety instructions in each of the chapters.

2.11 Environmental Protection

CAUTION!

Environmental hazard caused by incorrect handling!

Incorrect handling of environmentally hazardous substances, especially when incorrectly
disposed of, can cause considerable damage to the environment.

For this reason:

S

Always heed the information below.

S

If environmentally hazardous substances are accidentally released into the environment,
immediately take suitable measures to minimise this. If in doubt, inform the responsible
local authorities.

The following environmentally hazardous substances are used:

Lubricants

Lubricants such as grease and oils contain poisons and environmentally hazardous substances. They must
not be allowed to be released into the environment. Disposal must be performed by a qualified disposal
company.

Diesel Fuel

Diesel fuel contains poisons and environmentally hazardous substances. They must not be allowed to be
released into the environment. Disposal must be performed by a qualified disposal company

Coolants

Coolants can contain poisons and environmentally hazardous substances. They must not be allowed to be
released into the environment. Disposal must be performed by a qualified disposal company.

Содержание D2842 LE103



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды