8
3.
Keep children and bystanders away while operating the mechanical crimping tool.
Distractions can cause you to lose control.
4.
Please do not use or store this tool under high temperature, or one surrounding filling with
corrosive fluid. Pay attention to the sealing kits becoming aging.
Personal safety
1.
Stay alert, watch what you are doing and use common sense when operating the tool. Do not
use the tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating hydraulic tools may result in serious personal injury.
2.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid shoes, hard hat, or hearing protection used for appropriate conditions will reduced
personal injuries.
3.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes jewelry or long hair can be caught in moving parts.
4.
Do not force the tool. Use the correct power tool for your application .The
correct power tool
will do the job better and safer at the rate for which it was designed.
5.
Store power tools out of the reach of children and do not allow persons who are unfamiliar
with the tool to work with it. This tool is dangerous in the hands of untrained users.
6.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the tool operation. If damaged, have the tool
repaired before use. Many accidents are caused by poorly maintained power tools.
7.
Use the tool in accordance with these instructions and in the manner intended for the
particular type of tool, taking into account the working conditions and the work to be
performed. Use of the tool for operations different from those intended could result in a
hazardous situation.
Specific safety rules
1.
Maintain labels and nameplates on the tool which carry important safety information. If
unreadable or missing, contact the agent to replace.
2.
This product is not a toy, keep it out of reach of children.
3.
Do not put your fingers in the head of the working head when you are operating, your fingers
could be pinched very severely.
4.
Connect the pump with the working head completely.
5.
Do not fill the oil when the pressure is not fully released.
6.
Do not carry the pump by the hose.
7.
Do not lay on or drop heavy subject on the hose.
8.
Prohibit bend the hose or loosen the coupler when the pressure not released
9.
Please contact the distributor or manufacturer immediately if the rated pressure not
reached. Never try any adjustment by yourself.
10.
When you are finished with the tool, immediately place back the dust/cover to prevent
pollution of the connector.
11.
The built-in safety valve goes through strict pressure test before marketing, please do not
adjust it by unprofessional person. If the pressure is not enough, please return the tool back
to the service center. The tool only can be re-used after checking and testing by trained
person.
