Attaching and Removing the
Neck Strap to the Camera
Eye-level Operation
No matter how carefully one focuses
the camera, if there is camera move-
ment during the instant that the shutter
is released, sharp pictures are unlikely.
To eliminate camera movement, care
must be taken regarding the method of
holding the camera and releasing the
shutter.
22
Waist-level Operation
When hand-holding the camera with
the Waist Level Finder attached, adjust
the length of the neck strap to take out
the slack and support the camera
firmly against your body.
Attaching it
to the camera
1. Draw out the neck strap fastener
the attaching clip while pushing it down.
2. Place the hole of the strap fastener
over the lifting lug of camera body as
illustrated, and pull until it clicks and
locks into place.
Removing it
from the
camera
With your finger, pull the neck strap fastener
attaching clip upward and push part
in the direction of the arrow. The strap
can now removed.
When attaching the strap to the lifting lug
on the side of the camera with the Wind-up
Crank, insert the neck strap fastener
into the lower pad of the double solt.
