3
or sharp objects into the material inlet and directly contact the rotating parts such as the auger, etc.; it is
strictly forbidden to use any object to replace the pusher rods. It is strictly forbidden to keep eyes close to
the material inlet to avoid injury.
8. The ingredients should be cut into small pieces so that they can be put into the inlet of the juicing body. If
there are fruits and vegetables with kernels, hard seeds, thick skins, or hard shells, remove them before
processing.
9. When ingredients are put in, the force to push the ingredients should not be too great.
10. It is normal for the fine strainer, juicing body cover, auger, and other parts to be stained after juicing
certain fruits and vegetables. It does not affect the quality of the food and will not be harmful to eaters'
health.
11. The product is equipped with an intelligent protection chip, making it automatically stop after 20 minutes
of continuous work. At this time, please stop the operation for 20-30 minutes, and then continue to use the
motor after cooling. This method is conducive to extending the service life of the product.
12. The product has a current limiting design. When processing harder ingredients, the motor will be
locked-rotor and the current will increase. When the current exceeds 2A, the machine will make a “click”
sound and the motor will stop working. This method can effectively protect the motor from over-current and
extend the service life of the motor.
13. If the motor stops automatically due to current limiting protection or locked-rotor during operation, the
power switch should be transferred to “REV” state, and the ingredients should be withdrawn. And then the
power switch should be transferred to “Hard” or “Soft” state to ensure the normal use of the machine. If it is
still locked-rotor, it is recommended to clean up the ingredients in the auger before continuing to use it. This
method is to protect the motor.
14. After use, please wait until the motor and auger stop rotating and make sure that the power is
disconnected before removing the detachable parts of the machine.
15. All parts of this product are not allowed to be disinfected with hot water over 80°C and microwave
ovens to avoid thermal deformation damage. Parts and materials in contact with food ingredients are, clean,
hygienic, reliable, and in line with food hygiene certifications.
16. Do not put the juicer body into water or other liquids, nor flush it with water or other liquids to avoid any
damage to the machine body.
17. Do not clean the product with steel wool, abrasive cleansers, or corrosive liquids (such as gasoline or
acetone).
18. Store the product in a place out of the reach of children. Use or play of the product by persons with
disabled limbs, sensory or mental disorders, or by persons without relevant experience or knowledge
(including children) is forbidden.
19. This product is only applicable to individual or home applications.
20. This product is a Class I appliance. The grounding wire of the socket must be well-grounded.
Содержание MMC2001
Страница 10: ......
