
H ealth and safety
19
Emergency procedures
Introduction
This section describes what to do in an emergency situation and what will happen in the
event of power failure.
Emergency situation
In an emergency situation, do as follows to stop the run:
Switch off the power supply by either:
l
using the system power switch, or
l
disconnecting the power cord, or
l
switching off the fixed power supply circuit breaker.
Power failure
The following list describes what happens in the event of power failure.
l
The MicroCal PEAQ-ITC run is interrupted immediately.
l
The data collected up to the time of the power failure is saved.
l
The Controller PC shuts down.
l
The washing module shuts down immediately.
Restart after emergency shutdown or power failure
To restart MicroCal PEAQ-ITC after emergency shutdown or power failure:
Step
Action
1
Make sure that the condition that caused the power failure or emergency stop is cor-
rected.
2
Restart the system according to the instrument starting procedure, see Prepare the
instrument.
Содержание MICROCAL PEAQ-ITC
