manualshive.com logo in svg

Malvern Mastersizer 2000, Руководство пользователя

Поделиться
Скачать
Malvern Mastersizer 2000 Скачать руководство пользователя страница 63

Mastersizer 2000

Page 5-1

 5

Viewing the results

Introduction

Once the result has been calculated, the data can be displayed in many forms. Each 
way of displaying the data is known as a report. Each type of report has a tab in the 

Measurement window

; to view the data in another report simply select the 

appropriate tab.

This chapter covers:

„

Displaying the information – the reports provided and the use of the 

Records

 

tab. 

„

Using the 

Report Designer

 to create custom reports.

Note

All the tabs in a 

Measurement window

 display the same measurement 

data but in different formats.

Malvern provides several default reports, identified by the “(M)” in their name, that 
will be sufficient for most users. The user can also create their own custom reports 
as required. 

Generally a computer monitor displays information in a landscape format while a 
printer prints in a portrait format. Therefore, each report is split into two formats- 
one for displaying the report on the screen, and another configured for a printer. It 
is possible for the screen and print formats to be configured to report different 
information.

A report file has the extension .

pag

. The file holds both the screen and print varia-

tions. 

Chapter 6

 gives details on interpreting the information in a report.

i

MAN0384-1.0 Mastersizer 2000.book  Page 1  Tuesday, March 20, 2007  8:56 AM

Содержание Mastersizer 2000



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды