Malsch Homecare, Инструкция по эксплуатации

Страница: 19 / 32

| 19
sections are adjusted equally so that the occupant can be
brought into an upright sitting position.
This function should only be used with mobile occupants and
occupants without any physical problems.
Caution! Please consider occupant safety
when setting the auto contour. No foreign
objects should be located in the area of the
lifting mechanism.
Trendelenburg-/
anti-Trendelenburg position
('Melanie')
The 'Melanie' care bed comes with reclining surface inclina-
tion as standard.
The head or foot height is set using the button on the hand
controller.
(Trendelenburg/anti-Trendelenburg
operating buttons)
Caution! Please consider occupant safety
when adjusting the bed inclination. No for-
eign objects should be located in the area of
the lifting mechanism. This function must only
be activated by specialist staff and must be
locked on the back of the hand controller by
specialist staff. Incorrect settings may result in
serious injury to the occupant.
Hand controller locking function
The electrical unit combines state-of-the-art technology and
single-fault safety.
The locking function is a further safety precaution. The lock-
ing function is located on the back of the hand controller and
can be operated by staff with a key switch. In the event of
failure of the electrical motors, the functions can be disabled
via the corresponding rotary switch.
Operation:
The hand controller functions can be restricted by turning
the key switch to the different switch positions. A precise de-
scription of the symbols is provided on
p. 14/p. 15
of the
instruction manual.