INSTRUCTION MANUAL FOR
LAPTOP OR TABLET LOCKER
1 of 2
Manufacturer: MALOW Sp. z o. o., St. Wojska Polskiego 114A, 16-
400 Suwałki, Poland
Destination:
Locker is designed for keeping and charging notebooks or tablets.
Operating conditions:
1. The appliance may be used by children over 8 years old and by persons with reduced physical,
sensory or mental capacities, or who lack experience or knowledge, on condition that they are under
supervision or after they have received instructions concerning the safe use of the appliance and the
understanding of the dangers involved. Children must not play with the appliance. Cleaning and
maintenance intended to be carried out by the user must not be performed by children without
supervision.
2. If not detachable connection cable seems broken, it should be replaced by the manufacturer,
service agent or similarly qualified persons.
3. Before moving locker check all safes they are empty and all doors closed. Carry them with minimum
2 persons. Place the locker on an even floor and secure against tipping over. The Locker body
allows to screwing lockers together and to wall (Drawing 4).
4. In case of see any damaged sockets, cords or body intermediately disconnect locker from power
supply and stop using it.
5. All repairs should be made only with service agent or similarly qualified persons.
It is not allowed
to make any changes and adjustments in both elements and electrical elements of the
product.
6. Connection cable connect to the power strip equipped with overload/short-circuit protection and
residual-current device with a tripping current of 30mA or less.
(Connect the cable to a power
supply without laptop connected to power). Do not use extension cord or socket distributor.
7. Before lock the doors check if inside there is no animals.
8.
Lithium-ion batteries in high temperatures can explode and cause a fire.
9.
The locker can heat up from connected computers.
10. Maintenance or service of the locker make with disconnected power supply. Do not use strongly
caustic detergents for clearing the locker. Clean locker with dry or damp cloth.
11. Maximum current load of all connected devices is 16A.
12.
Only “b” version:
Installed electrical profile have automatic thermal fuse (Drawing 3 pos. 4). In
case of activation of the fuse it is necessary to disconnect
AC/DC adapters
and resetting them
through pushing button on the fuse until you feel it “click”.
13.
Keep the sequence of disconnecting from power:
- First, disconnect the device inside locker
- Next, unplug the locker
Safe dimensions Chosen
model
Model w x d
[cm]
H4112 28x30
H5112 28x45
L4106 28x30
L5106 28x45
M4109 28x30
M5109 28x45
4107i 32x32
4110
32x45
4110b 32x45
4111
32x45
4115
32x45
4115i 32x32
4115ib 32x32
BACK SIDE
VIEW
Drawing 1
Drawing 3
Drawing 2
Automatic fuse
(b version) -
pos.4
Connection
cable - pos.3
Table 1
Electrical
socket -pos.1
Compartments
for PC- pos. 2
