Mallincam HD-10 II User Manual
March 30, 2020
HD-10 II User Manual
Page 38
Histogram Tab
It is here in the
Histogram Tab
that you have complete control of
the
Live Image Histogram
which allows you to either manually
control the
brightness
of each of the color channels or let the
software perform this task for you. This allows you to pull out as
much detail hidden in the image as you can.
Feature
Title
Usage
Histogram
You can use the 2 controls to manually adjust the
image’s dark tones (Left control), and the gamma
highlight brightness levels (Right control) to
regulate the image’s contrast, shading, and
image layers to obtain the best balance for the
image.
Moving the
Black
control to the right darkens the
image and to the left lightens the image.
Moving the
Gray
control to the left brightens the
image and to the right darkens the image.
The goal is to use as much of the necessary data
(the graph) between the two controls without
clipping the necessary data.
Color Channel
This allows you to select either all 3 color channels
together (
Red
,
Green
, and
Blue
), or select each
color independently to use with the above
Histogram controls.
Left Control
This control allows you to enter in a value for the
Left Control
which represents the amount of pixel
value proportion for dark.
When the
Auto Min
is selected, the software will
place the Left control with the
minimum
value for
the color choice (will not provide too much color).
Right Control
This control allows you to enter in a value for the
Right Control
which represents the amount of pixel
value proportion for bright.
When the
Auto Max
is selected, the software will
place the
Right
control with the maximum value
for the color choice (will not provide too little
color).
