2,b - Attach part ( Q ), seat back assembly , to part ( J ),
seat bottom assembly
, as shown in Figure 2
see detail 2 using ( 4 ) of screws ( A ) , 2 on each side,
tighten screws using a phillips-head screwdriver.
Figure 2
A
( Detail 2 )
( Detail 1 )
2,a - To Attach part ( Q ), seat back assembly , to part ( J ),
seat bottom assembly as shown,
you must align the
lower front edge of yoke to the front edge of groove,
see detail 1.
Front edge of groove
Front edge of yoke
( Seat Bottom Assembly )
( Seat Back Assembly )
Figure 3
Q
3,a - Attach part ( K ), right side front and rear leg assembly, to assembly from
Figure 2 as shown in Figure 3, make sure identification marks ( FR ) and ( RR ) are
facing inside towards the seat see detail 3, using ( 2 ) of joint connector bolts ( B ),
( 2 ) washer ( C ), ( 2 ) lock washer ( D ), ( 2 ) hex nut ( E ), see detail 4
tighten bolts using an allen wrench and also an adjustable wrench. Follow
the same instructions for left side front and rear leg assembly.
3,b - Attach part ( K ), right arm leg assembly, to seat back assembly ( Q ), as shown in
Figure 3, see detail 5, using ( 3 ) of lag screws ( F ), tighten screws using and allen
wrench. Follow the same instructions for left side front and rear leg assembly.
B
C
D
E
( Detail 4 )
F
F
( Detail 5 )
B
F
K
identification marks
(Right side
Front & Rear leg)
(FR)
(RR)
( Detail 3 )
( Seat Back
Assembly )
Q
T
