Malcolm's Miniatures Stratford BK202, Инструкции

Страница: 1 / 3

This is a kit for a typical timber framed “black & white” building, based on a
building in Stratford upon Avon.
Contents of the kit:
Ref Description Qty
1 side of building shell 2
2 rear of building shell 1
3 ground floor 1
4 intermediate floor 2
5 upper floor front 1
6 middle floor front 1
7 ground floor front 1
8 front sides 2
9 upper floor 1
10 middle floor 1
11 ground floor/pavement 1
12 upper floor overlay 1
13 middle floor overlay 1
14 ground floor overlay 1
15 front side overlay 2
16 main side overlay 2
17 barge board 1
18 upper window frame 2
19 upper window glass 1
20 upper window lattice 1
21 middle window frame 2
22 middle window glass 1
23 middle window lattice 1
24 lower window frame 2
25 lower window glass 1
26 lower window lattice 1
27 door 2
28 main roof 2
29 front roof 2
30 roof truss 2
Hinges and pins 2
Chimney & chimney pot 1
The main parts are provided with slots and tabs to ease assembly. Some of the wall parts have a horizontal
line marked as a guide to placing of the timber frame overlay. The walls must be fitted with this line to the
outside. Handle the window lattices with care as they are quite fragile.
To complete the kit you will need glue, paint, woodstain (or paint), white DAS or similar air drying clay,
Impress moulds for stone or brick and tiles or slates, as required.
We recommend the use of Aliphatic Resin and a pin point applicator for assembly of this kit.
Instructions for Kit No BK202 - 1/48
Timber Framed building - The Stratford