background image

PRODUCT INSTALLATION AND OPERATION INSTRUCTIONS:

Please pay attention to place your light in a non-shaded place with 

sufficient  sunshine  provided  for  its  operation.  Before  turning  your  light 

on the first time, please place the light in a sunny place in a position where 

the solar panel face the sun at midday, and leave the light charging the 

battery for 2-3 days.

Recommended installation height: 2-3 m.

1. 

Pay attention to locate the light in a place on your wall where sufficient 

sunlight is provided daytime to charge your light. Measure the location 

of the holes correctly, and drill the holes on the wall.

2. 

Push the wall anchors inside the holes, and drive the screws into the 

anchors.

3. 

Place the light gently on the screws with its fixing points.

1. 

Charging by solar energy will start automatically during daytime.

2. 

The light sensor turns on your light at dusk, and keeps it at dimmed 

mode (2 W). Whenever motion is detected by the microwave sensor, the 

light will switch to maximum power (10 W).

3. 

Once no motion is detected anymore, the light maintains full power 

output for 30 seconds before switching back to dimmed power mode.

5

Содержание MOONSTONE













Отзывы: