PRODUCT INSTALLATION AND OPERATION INSTRUCTIONS
ON/OFF
Please pay attention to place your light in a non-shaded place with
sufficient sunshine provided for its operation.
Installation & start-up of the light:
1.
Turn ON the light by pressing the ON/OFF button
2.
Place the light on the pole (the pole is not the part of the package).
Please care about choosing the right material, and wall width for the
pole you are about to use, and also please pay attention for the right
fixing method of the pole into the ground/onto the chosen hard surface
to avoid accidents. Please care to set up the column exactly vertical from
all views. The diameter of the column should be below 60 mm (2.36”).
The recommended installation height is 6-8 m, while the recommended
distance between the poles is 20-22 m if multiple lights are installed.
3.
Drive in the tightening bolts until you can, then tighten them further
with an allen key. ATTENTION! Do not overtighten the bolts!
Operation of the light (no interaction is required by the user):
1.
Charging by solar energy
will start automatically
during daytime.
2.
The light sensor turns
on your light at dusk.
Considering
sufficient
battery charge the light
applies full power for the
first 5 hours of the night.
3.
After 5 hours the light
switches to dimmed
mode (25% power) + 100%
power when it recognizes
movement. The light keeps this operation till the morning.
4.
Once no movement is recognized anymore, the light keeps full power for
30 seconds before switching back to dimmed light mode.
5
Содержание Highway Raptor 40
Страница 2: ...2 ...
