Malaguti XTM 50 2007, Руководство пользователя

Страница: 135 / 304

12
3
INSTRUMENT AND CONTROL FUNCTION
ENGLISH
4- Coolant temperature warning light
This light comes on when the temperature of the coolant is too
high.
When this light comes on, stop the engine at once and
follow the instructions on page 35.
5- Neutral indicator light “
N
”
This light comes on when the transmission is in neutral position.
6- Oil level warning light
This warning light comes on when the oil level is low. The circuit
of this warning light can be checked according to the following
procedure:
Every time the ignition key is turned to check if the light comes
on; if it does not, call an authorised service centre.
Do not operate the engine until you are sure there is
enough oil in the tank.
Even if the oil level is sufficient, the warning light may
flicker when riding on a slope or during sudden accel-
eration or deceleration; this is not a malfunction.
For information about replenishing, see the instructions on page
20.
7 (*) - High beam indicator light
SWITZERLAND version only.
This indicator comes on when the high beam headlight is operated.
CHECKING THE CIRCUIT OF THE OIL LEVEL WARNING LIGHT
Turn the main switch to .
Shift the gear into neutral.
The oil level warning light comes on.
The oil level warning light goes off.
Ask a MALAGUTI Dealer to check the electrical
circuit.
Start the engine.
The oil level warning light does not come on.
The oil level warning light comes on.
The oil level and electrical circuit are OK. You can
use your vehicle.
Fill the tank with engine oil.