5-1 Armature, Ball bearing 6301DDW/ 6200DDW, Small spiral bevel gear (cont.)
5-1-1 Disassembling (cont.
)
5-1 Armature, Ball bearing 6301DDW/ 6200DDW, Small spiral bevel gear (cont.)
5-1-2
Assembling
Direction of
Makita logo
on Motor housing
Fig.5-1-1-16
Face the indication of Parts No. for Diffuser toward Gear housing complete,
and fit Diffuser into Gear housing complete.
Fig. 5-1-1-15
Fig. 5-1-1-12
[13] Remove Ball bearing 6301DDW with 1R131.
Ball bearing 6301DDW
1R131
[14] Hook the jaws of 1R269 to Ball bearing 6200DW.
While holding the jaws with water pump pliers, remove
the ball bearing.
1R269
Water pump pliers
Ball bearing 6301DDW
[15] Remove Diffuser by passing 1R015 or like through a bent of Gear housing complete then pushing it out to the opposite.
Vent of Gear housing complete
1R131
Diffuser
Diffuser
Asseemble the components by reversing the disassembly procedure.
Also, refer the following points.
Fig. 5-1-1-13
Fig
.
5-1-1-14
Indication of Parts
No. for Diffuser
Be careful about the directions of Bearing box ,
Gear housing complete and Motor housing
Gear housing
complete
Projection of
Bearing box
Switch
8 / 25
