Makita GA7020R, Инструкция по эксплуатации

Страница: 11 / 92

11
*1 Do not use Super flange and Ezynut together.
*2 In European countries, when using a diamond wheel, the ordinary guard can be used instead of the special guard
covering the both side of the wheel.
*3 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
For Model GA7020R
Noise
ENG102-3
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
): 90 dB (A)
Sound power level (L
WA
): 101 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
ENG208-4
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: surface grinding
Vibration emission (a
h,AG
): 8.0 m/s 2
Uncertainty (K): 1.5 m/s 2
If the tool is used for other applications, the vibration
values may be different.
ENG313-2
Work mode: disc sanding
Vibration emission (a
h,DS
): 3.0 m/s
2
Uncertainty (K): 1.5 m/s
2
For Model GA7030R
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
): 90 dB (A)
1 Side grip
2 Wheel guard for Depressed center grinding wheel / Multi-disc / Wire wheel brush
3 Inner flange / Super flange / Inner flange 102 (Australia and New Zealand only)
4 Depressed center grinding wheel / Multi-disc
5 Lock nut / Ezynut
*1
6 Wheel guard for Abrasive cut off wheel / Diamond wheel
*2
7 Inner flange / Super flange / Inner flange 78 (Australia and New Zealand only)
8 Abrasive cut off wheel / Diamond wheel
9 Outer flange 78 (Australia and New Zealand only)
*3
10 Lock nut / Ezynut
*1
11 Rubber pad
12 Abrasive disc
13 Sanding lock nut
14 Wire wheel brush
15 Wire cup brush
– Lock nut wrench
– Dust cover attachment
2
3
5
6
7
8
9
10
2
11
4
12
1
13
14
15