2 ENGLISH
SPECIFICATIONS
Model:
DUN501W
Blade length
500 mm
Strokes per minute
2,000 / 3,600 / 4,400 min
-1
Cutting blade angle
115° (up 45°, down 70°)
Overall length
2,115 mm
Rated voltage
D.C. 18 V
Net weight
3.9 - 4.2 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
PDC01
•
The battery adapter(s) listed above may not be available depending on your region of residence.
•
Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Symbols
The followings show the symbols used for the equip
-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Do not expose to moisture.
Wear a helmet, goggles and ear protection.
Beware of pinching.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or battery
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi
-
ronmentally compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
