27 / 32
8-3
Main switch section
Fig. 53
1
Main switch
3
Switch unit (for preventing kickback)
2
Switch
4
Range A
5
Put Controller lead wires of Switch unit (for preventing kickback) under this Connector.
6
Be careful not to put Lead wires on these receptacles.
7
Be careful not to slack Lead wires in Range A.
8
Fix Lead wires of Switch, Lead wires of Main switch, Lead wires of Switch unit (for preventing kickback) in these Lead wire holders.
Fix Lead wires (red and white) of Switch in each Lead wire holder and should be up side of the other Lead wires.
9
Fix Lead wires of Main switch in these grooves.
10
Be careful not to put Lead wires on this rib.
11
Put Lead wires of Main switch between these Ribs.
1
7
2
3
4
1
8
10
9
5
6
11