Makita DUC256, Руководство по ремонту, Страница: 18 / 32

18 / 32
6-3-2 Assembling
Fig. 36
1
Connect the connector and the receptacle terminals
to Switch [1].
Note
Connect the switch terminals (2 locations) so that the
white to B1 and the red to B2.
Fig. 37
2
Connect Flag receptacles to Terminals [1] (2 pcs).
Note

Connect Flag receptacles on the following color
lead wire ends to the tabs of Terminal [1].

orange (to + marked tab)

white (to AS marked tab)

blue (to – marked tab)

Connect the other Terminal [1] as follows:

red (to + marked tab)

yellow (to AS marked tab)

black (to – marked tab)
( Fig. 50 )
3
Connect the connectors to Switch units [2] (2 pcs).
Fig. 38
4
Press-fit Ball bearing 696ZZ [2] into Rotor [1] with
1R033 and 1R026.
[2]
[1]
1R026
1R033
[1]
[1]
[2]
[2]
[1]