2
CAUTION
Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Follow the instructions described below in advance before repairing:
·
Wear gloves.
·
Remove the recipro saw blade from the unit.
·
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what are the parts.
It is also recommended to have boxes ready to keep disassembled parts by group.
·
Handle the disassembled parts carefully. Clean and wash them properly.
·
If some bolts and screws are too tight, use an impact driver.
·
Tighten the bolts and the screws to the specified torque.
3
NECESSARY REPAIRING TOOLS
Code No.
Description
Use for
1R269
Bearing extractor
removing Ball bearings
1R291
Retaining ring S and R pliers
removing Retaining ring S-12
3 / 24
