5-3-2
Assembling
[1] Assemble by reversing the disassembly procedure. Be careful to check the points mentioned in
Fig. 5-3-2-1-1
,
Fig. 5-3-2-1-2
.
Note:
When assembling Rotor ass'y to Motor housing, be careful not to pinch your fingers between Rotor ass'y and Baffle plate.
Caution for Handling of Rotor ass'y (Armature ass'y)
When handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in
Fig. 5-3-2-1-1
.
Because Rotor has strong magnetic force, failure to follow this instruction could result in:
·
Finger injury caused by pinching between Rotors pulling each other
·
Magnetic loss of Rotors or damage on the magnet portion of Rotor (
Fig. 5-3-2-1-2
)
5-3-2-1
For DJR187, DJR360
Fig. 5-3-2-1-2
Fig. 5-3-2-1-1
Fig. 5-3-2-1-4
[3] Check that M5 Square nut is inserted into Motor
housing.
Fig. 5-3-2-1-3
[2] Set the U-shaped legs of Bearing retainer 66 into the
groove of Gear housing L assembly to assemble
Armature ass'y.
Note:
If it is hard to assemble Armature ass'y, warm Gear
housing L assembly with a heat gun.
U-shaped legs of
Bearing retainer 66
Groove of Gear
housing L assembly
M5 Square nut
M5 Square nut
15 / 24
