4 / 35
6
REPAIR
6-1
Bit sleeve section
6-1-1
Disassembling
Fig. 2
1
Remove Ring spring 9 [1] with 1R003, 1R212-A
and 1R212-B.
2
Remove Flat washer 10 [2], Compression spring 10
[3] and Bit sleeve [4].
Fig. 3
3
Remove Steel balls 2.4 [2] (2 pcs) with a thin
slotted screwdriver [1].
Tips
Remove Steel balls 2.4 [2] (2 pcs) by picking them
out with a screwdriver or the like magnetized with
1R288.
6-1-2
Assembling
Fig. 4
1
Assemble Steel balls 2.4 [2] (2 pcs) with a thin
slotted screwdriver [1].
Tips
Apply some grease to Steel balls 2.4 [2] (2 pcs.) so as
not to fall off them.
Fig. 5
2
Assemble the following parts, then assemble Ring
spring 9 [1] with 1R003, 1R212-A and 1R212-B.
Bit sleeve [2]
Compression spring 10A [3]
Flat washer 10 [4]
Note
Insert a bit and check that the bit can be attached or
detached properly.
[1]
[2]
[3]
[4]
1R003
1R212-A
[4]
[1]
[2]
[1]
[2]
[1]
[4]
[3]
[2]
1R003
1R212-A
[2]
