4
ENGLISH (Original instructions)
Explanation of general view
1-1. Lock button
1-2. Switch trigger
2-1. Speed adjusting dial
3-1. Notches
3-2. Front grip
3-3. Screwdriver
3-4. Hole in front grip
4-1. Abrasive disc
5-1. Push button
5-2. Dust nozzle
6-1. Dust nozzle
6-2. Push button
7-1. Hook
7-2. Dust nozzle
7-3. Push button
7-4. Dust bag
9-1. Groove
9-2. Front fixing cardboard
9-3. Front side of paper dust bag
10-1. Claws
10-2. Upper part
11-1. Notch
11-2. Guide
14-1. Sponge pad
15-1. Felt pad
16-1. Wool pad
SPECIFICATIONS
Model BO5020
BO5021
Pad diameter
123 mm
Abrasive disc diameter
125 mm
Orbits per minute (min
-1
)
12,000
4,000 - 12,000
Overall length
288 mm
Net weight
1.4 kg
Safety class
/II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BO5021
Sound pressure level (L
pA
) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model BO5021
Work mode : sanding metal plate
Vibration emission (a
h
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Random Orbit Sander
Model No./ Type: BO5021
are of series production and
