background image

6

FUNCTIONAL 
DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Shaft lock

CAUTION:

Never actuate the shaft lock when the spindle is moving.
The tool may be damaged.

Press the shaft lock to prevent spindle rotation when install-
ing or removing accessories.

Switch action

CAUTION:

Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the “OFF”
position when released.

Switch can be locked in “ON” position for ease of
operator comfort during extended use. Apply caution
when locking tool in “ON” position and maintain firm
grasp on tool.

Do not pull the trigger forcibly without pushing in the
lock-off button.

To prevent the switch trigger from accidentally pulled, a lock-
off button is provided. To start the tool, push in the lock-off
button and then pull the switch trigger. Release the switch
trigger to stop. For continuous operation, pull the switch trig-
ger and then push in the lock-on button. To stop the tool from
the locked position, pull the switch trigger fully, then release
it.

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

1. Shaft lock

1

001021

1. Lock-off button
2. Switch trigger
3. Lock-on button

2

1

3

001034

Содержание 9526PBH

















Отзывы: