background image

3. General advice

3.1 General safety notes

Make sure that the local mains voltage corresponds with the information on the
type sticker on the inside of the espresso machine's drip tray.

The installation of the machine is to be carried out by authorized and qualified
specialists according to the instructions in chapter 5.

Plug the machine into a grounded socket only and do not leave it unattended.

Unplug the machine or turn off the main switch before cleaning the machine’s
interior. Never use detergents of any kind.

This machine is designed for the sole purpose of producing coffee, hot water and
steam for hot drinks. All other uses are incorrect and dangerous. 

This machine is designed for domestic and semi professional use. 

The machine components are made of non-toxic and long-lasting parts which are
easily accessible for cleaning and maintenance. 

The end user must be an adult, sufficiently trained to operate the appliance
properly and it must forbid the use of the appliance to children or non-responsible
persons. 

To ensure efficient and correct operation it is essential to follow the
manufacturer’s instructions concerning the periodic maintenance carried out by
an authorized technician in compliance with the local standards and laws. 

The installation technician, the user and the person in charge of maintenance are
obliged to inform the manufacturer of any defects or damages which could affect
the safety of the original installation. 

The installation technician must check the surrounding area to ensure safe and
hygienic use are guaranteed. 

The machine components’ manufacturers are responsible for the parts supplied
by them. The customer is responsible for the personal use of the equipment. Do
not expose the machine to environmental elements (sun, rain, etc.).

When the machine is idle and not in use for an extended period of time, it should
be emptied completely and stored in an area with temperature above freezing
0°C or 32°F. This prevents any possible damage to pipes and the boiler.

All maintenance procedures must be carried out by authorized technicians only
and all spare parts must be original. 

Any modification or forcing performed by persons not unauthorized by the
manufacturer will void all warranties on the device.

Never bend, roll or pull the electrical supply cable.

Never submerse the machine in water, never operate the machine with wet hands
or feet and do not operate the machine with bare feet.

The machine has to be installed with an efficient ground system; the
manufacturer recommends a wooden platform on which the machine can stand.

Never operate the machine without water.

The machine must be operated with clean drinking water. Use water softeners if
the water has a high mineral content. Mineral deposits may obstruct the
machine’s water circuit which may cause damage to the machine and possibly
personal injury. The machine must operate only with drinking water.

The machine has to be switched off whenever unattended from the operator. Tea
and coffee cups must be carefully drained before placing them over the cup-tray.

Page 5

Содержание S7 PRO-PID





















Отзывы: