MakerPi K300, Руководство пользователя, Страница: 13 / 43

13
4.1.5 XYZ move axis

In use, we often need to manually
move the axis.
Select "XYZ move axis".

Then it will enter the coordinate
movement interface of XYZ. Every
touch of "+" and "-" will change the
coordinate to 1, and the long press will
change the coordinate to 10.
4.1.6 Preheat
Before preparing to print, the nozzle
and the hotbed can be heated together by
selecting preheating to reach the selected
temperature, which can reduce the
preparation time of temperature rise before
printing. There are two forms of preheating,
preheating PLA and preheating ABS.
When you choose preheat PLA, it can
be found that the screen goes back to the
main interface, the nozzle and the hotbed
will be heated at the same time.The nozzle
will be up to 180 and the hotbed will be up
to 70.