Make Noise soundhack Mimeophon, Руководство пользователя, Страница: 16 / 20

1 6
Tips and Tricks
- Zones 6 and 7 are very long, to the extent that all manipulations of the Mimeophon in shorter Zones will still appear in Zones 6
and especially 7 for potentially several minutes, especially with higher Repeats settings. Consider playing in the smaller Zones for
awhile, then pressing HOLD, removing modulation, and navigating to the Zone 7, using the Repeats control to view different
portions of the complex facsimile you have created. (Bonus: Press Skew to change the vantage points' drift over time.)
- Manipulations of Zone 0 can be preserved as echoes by modulating to larger Zones. Sequencing Zone using the same or
related clock rate to a synth sequence that is being repeated by Mimeophon opens a window into a rhythmic lattice of differing
Repeat styles per note or beat.
- Since Color modulation is cumulative, different speeds of modulation will have different effects over time depending on the
Zone/Rate. Take advantage of this!
- Impulses and noise bursts make great inputs for Zone 0 , as do droning oscillators.
- Flip Zone 0 or 1 while sequencing μRate to drop the sequence by an octave and change its harmonic structure.
- With Skew engaged in Zones 1-7 , μRate's response is inverted on the right channel , which is great for creating stereo chorus. Try
a lower amplitude LFO of 10Hz or slower to start.
- Repeats in Zone 0 can be both excited and "dampened" by changing volume levels at the input. When Zone 1 is empty,
transients will generate audio rate repeats, but also with higher Repeats settings, going from silence to higher vol ume can
suppress feedback. This means that transient shaping, for example with MATHS, can potentially be very expressive.
- If SKEW is enabled, the resulting two Rates will be OR’ed together, resulting in clock pulses from both Left and Right channels
being output by the Rate Output at once. When externally clocked, this allows the Mimeophon to be used as an unusual dual
clock divider or multiplier. Feed this output to other places in your system to more fully integrate the Mimeophon into your
patch.