18
Patch Examples (Cont’d):
Forward >>
<< Reverse
Sound Replacer:
Perform above Recycler patch. Once you have sounds isolated within Splices, select the Splice containing sound to be
replaced using Organize Panel Control(13). Patch new Sound to Signal IN (2). Set SOS (4) to Full counter clockwise. Patch EOS to
trigger new Sound (perhaps use VCA and Envelope to control new sound). When you are ready to record the replacement, mult
the EOS OUT and patch to Record Pulse IN. Once Sound is replaced, remove EOS from Record Pulse IN. When you are done
replacing sounds, press and hold Splice button(18) until the Rec LED (17) starts flashing. Listen to the results.
Sliding PHONOGENE:
With a sound already recorded into the PHONOGENE, set Vari-Speed to 50%, so that playback is stopped. Patch the CH. 1
Pressure Output from PRESSURE POINTS to Channel 1 Signal Input of MATHS. Patch the CH. 2 Pressure CV Output from PRESSURE
POINTS to Channel 4 Signal Input of MATHS. Set the Rise and Fall of both CH. 1 and 4 to around 65% and Vari-Response of both
channels to “loggish.” Set MATHS CH. 1 attenuverter full counter clockwise so that the resulting signal is inverted. Set MATHS CH.
4 full clockwise. Null MATHS CH. 2 and 3. Patch MATHS Sum Output to PHONOGENE Vari-Speed CV Input and set the associated
attenuverter to about 2:00 Now, use the pressure applied to the PRESSURE PLATES to control the Playback Speed and
Direction.