Make Noise DynaMix Скачать руководство пользователя страница 3

Limited WARRANTY:

3

About This Manual:

Written by Tony Rolando and Walker Farrell 

Illustrated by W.Lee Coleman

Make Noise warrants this product to be free of defects in materials or construction for a period of one year 

from the date of purchase (proof of purchase/invoice required). 

Malfunction resulting from wrong power supply voltages, backwards or reversed eurorack bus board cable 

connection, abuse of the product, removing knobs, changing face plates, or any other causes determined by 

Make Noise to be the fault of the user are not covered by this warranty, and normal service rates will apply. 

During the warranty period, any defective products will be repaired or replaced, at the option of Make Noise, 

on a return-to-Make Noise basis with the customer paying the transit cost to Make Noise. 

Make Noise implies and accepts no responsibility for harm to person or apparatus caused through operation 

of this product.

Please contact 

[email protected]

 with any questions, Return To Manufacturer Authorization, 

or any needs & comments.

 

http://www.makenoisemusic.com 

Содержание DynaMix











Отзывы: