Tools Required: Drill, Tape Measure, Mallet
STEP 1 – ASSEMBLE GATE FRAME
If fitting a temporary gate frame kit, fit this before installing the
temporary fence panels, its easier to start from the gate and work
outwards to ensure the gate opening is correct.
1. Lay flat and slide parts together as shown
2. Fix off with supplied screws
3. Position frame as required on site and hold in place with supplied
steel pegs placed through the base plate and into the ground. Fix
firmly using 2100mm long star pickets (purchased seperately) placed
through the baseplate cutout and hammer into ground until stable.
Ensure the pickets are vertical.
Frame is now ready to install a Protector Pool Gate.
We recommend
hinges
and latch, follow installation guide
with products to ensure pool safety
compliance.
1
2
3
USE DURING
CONSTRUCTION
IDEAL FOR
TEMPORARY
POOLS
TEMPORARY
GATE FRAME
AND FENCING
INSTALLATION
GUIDE