Major tech MT565, Руководство пользователя, Страница: 11 / 32

DC CURRENT MEASUREMENTS
CAUTION: Do not make 20A current measurements for longer
than 30 seconds. Exceeding 30 seconds may cause damage to
the meter and/or the test leads.
1. Insert the black test lead banana plug into
the negative COM jack.
2. For current measurements up to 4000µA
set the function switch to the yellow µA
position and insert the red
DC,
test lead banana
DC,
test lead banana
insert the red test
DE button to indicate “ DC ” on
n up the circuit at the point where you wish to measure
t.
to the positive side of the circuit.
9. Read the current in the display.
plug into the µA/mA jack.
3. For current measurements up to 400mA
set the function switch to the yellow mA
position and insert the red
plug into the µA/mA jack.
4. For current measurements up to 20A DC,
set the function switch to the yellow
10A/HZ/% position and
lead banana plug into the 10A jack.
5. Press the MO
the display.
6. Remove power from the circuit under test,
then ope
current.
7. Touch the black test probe tip to the negative side of the circui
Touch the red test probe tip
8. Apply power to the circuit.
10