10
3. For current measurements up to 400mA DC, set the
function switch to the mA range and insert the red
test lead banana plug into the (mA) jack.
4. For current measurements up to 10A DC, set the
function switch to the A position and insert the red
test lead banana plug into the 10A jack.
5.
Press the AC/DC button until “DC” appears in the
display.
6. Remove power from the circuit under test, then
open up the circuit at the point where you wish to
measure current.
7. Touch the black test probe tip to the negative side
of the circuit. Touch the red test probe tip to the
positive side of the circuit.
8. Apply power to the circuit.
9. Read the current in the display. The display will
indicate the proper decimal point, value and
symbol.
AC CURRENT MEASUREMENT
1. Insert the black test lead plug into the negative
(COM) socket.