Major Science MJ-105-S, Инструкция по эксплуатации, Страница: 10 / 20

9
MT-108
Construction Material (Tank, Gel
Maker Stand, Comb and Tray)
PC (Polycarbonate)
Construction Material
(Transparent Lid)
AS (Acrylonitrile-Styrene Copolymer)
Temperature Capacity 130°C
Maximum Gel Thickness 10 mm
Maximum sample for MT-108 25 samples
Unit Dimension (Tank and
Transparent Lid)
136 x 188 x 58 mm (W x L x H)
Gel Dimension for MT-108 50 x 83 mm
105 x 83 mm
Buffer Volume Approx. 400 ml
Transparent Lid Safety and ventilation design
Tray Black well-visualization strip
Migration distance index line
Rapid Casting Gel Use gel maker stand
Operating Temperature 4 - 40°C
Weight 0.7 kg
Section 3 Installation Instructions
1. Seat the tray in the unit and note the position of the comb grooves. The
samples run black to red but the trays can be used in the forward and
backward direction. So make sure that the comb grooves closest to the black
electrode are marked.
2. Remove the tray.
3. Note the position of the cover on the unit. This indicates the correct polarity
and the correct orientation of the power codes: black is negative and red is
positive.
DOMINIQUE
DUTSCHER
SAS