MISCOM7028GX/MISCOM8028GX Series Industrial Ethernet Switch
- 12 -
The switch should be connected to the protection ground: Grounding
and laying wires will effectively suppress the effects of noise caused by
electromagnetic interference. A ground connection should be made before
connecting the equipment, from the ground screw to the ground surface.
3.2. Mainframe Installation
Mainframe picture as below.
Mainframe picture
For most industrial applications, it is very convenient to install in a 19-inch
rack. Check the rack installation before mainframe installation, including the
following two items:
Is there enough room for installing this product?
Is there a power supply suitable for this product?
3.3. Cable Connection
After the correct installation, the cable can be installed and connected,
mainly including the cable connection of the following ports.
Server interface connection
The terminal equipment Gigabit TX ports provided by the product is