MIGE2210 Series Gigabit Din-rail Switch
- 8 -
connection
Gigabit Fx port status LED
1000M (Green
light light)
On
The port has established an active
network connection
Off
The port does not have a valid network
connection
100M Fx port status LED
100M (Green
light)
On
The port has established an active
network connection
Off
The port does not have a valid network
connection
3.6. Power Input Terminal
The schematic diagram of the power input terminals of MIGE2210 series
switches is shown in the figure. As shown in Figure 3-4.
Figure 3-4 Power supply input terminals of the MIGE2210 series switches
Power input
The MIGE2210 Industrial Ethernet Switch can be configured for DC12V-
DC48V, and AD220V inputs. It uses a 5.08mm pitch with a locking terminal to
connect two power inputs. When the input is AD220V, only the PWR1 power
port is valid.
Power failure alarm output
The MIGE2210 series switches support the power-down alarm function.
When the switch is powered normally, the relay normally closes the contact
open circuit. When the switch has no power input or the input power is
abnormal, the relay contact is closed.
The user can use the relay contact to output other external sound and light
alarm devices.
3.7. Fiber Optic Connection
Among the MIGE2210 series, MIGE2210-2GF and MIGE2210-2GF-4F
