MIEN5208 Series Managed Industrial Ethernet Switch
- 12 -
page can be roughly divided into three areas, the upper area displays the logo,
the lower left area is the function menu area, and the lower right area is the
main function display area.
4.2.1. Function menu
The left side of the page is the function menu area, which shows all
configurable software functions of the switch. The first level menus are device
information, basic functions, advanced functions, bus configuration and device
management. Each level menu contains several second-level sub-menus. Its
function is shown in below.
Menu
items
Page mark
Functions
Equipment
information
Basic
information
Display device information such as
name, number, software version, IP
address, etc.
Display port status, such as: quantity,
type, connection status, etc.
Basic
functions
Port
configuration
Configure basic information about each
port, such as rate mode, duplex mode,
and flow control.
Rate
configuration
Configure the packet type and
import/export rate limit rule for each
port.
Advanced
Functions
QoS
Configuring QoS features
VLAN
Configuring IEEE 802.1Q VLAN
functionality
Fast network
ring
Configure fast ring function
Multicast
configuration
Configure the mapping between static
multicast MAC addresses and their
member ports.
Alarm
configuration
Configure relay alarm function
Port
mirroring
Configuring port mirroring
Equipment
management
website
address
Configure the device's IP address,
subnet mask, and default gateway.
user
password
Configure the password of a normal
user.
system
message
Configure the device name, number,
etc.
System
Management
Switch reboot, factory reset and
upgrade
