S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 88
6.1.6 Change Swappable Optical Module
The changing processes of the SFP module, SFP+ module, and QSFP+ module are similar. The
following takes the SFP module as an example to describe.
When installing or uninstalling the SFP module, do not use the hands to touch the gold-
finger part of the SFP module directly.
Do not directly stare at the fiber connection holes of the optical module when the fiber is
pulled down, but the optical module is not pulled out.
Step 1:
Wear the anti-static wrist and pull out the fiber connected to the SFP module.
The pulling mode of the MPO fiber is different from the LC fiber. Hold down the fiber puller
with the “PULL” word on the MPO fiber interface, and pull out the fiber interface gently. In
this way, you can pull out the MPO fiber easily.
Step 2:
Pull the handle of the SFP module down to the horizontal position, and then pull
out the SFP module, as shown in the following figure.
Figure 6-23 Uninstall the SFP module
Step 3:
Fit the removed SFP module with the dust cap and put it in the anti-static bag or
packaging box, as shown in the following figure.
