Maipu S12800 Скачать руководство пользователя страница 109

Страница: 109 / 135

S12800 Routing Switch Installa

tion Manual V1.0

Maipu Confidential & Proprietary Information

Page 109

Name

Indicator Color

Status description

Off: The CMM serial port has no data sending and

receiving

SFU

Red and green

Green/on: All online SFU cards are loaded completely
and the SFU cards can work normally

Red/on: The SFU cards are all not online, or at least
one SFU card is not in the normal working state.

Note: As long as one SFU card is not in start ok state,

turn on the red no matter in loading, un-installing,

loaded, or loaded.

LPU

Red and green

Green/on: All online LPU cards are loaded completely
and the LPU cards can work normally

Red/on: The LPU cards are all not online, or at least
one LPU card is not in the normal working state.

Note: As long as one LPU card is not in start ok state,
turn on the red no matter in loading, un-installing,
loaded, or loaded.

MPU

Red and green

Green/on: The master MPU card is loaded completely

and works normally

Red/on: The master MPU works abnormally

FAN

Red and green

Green/on: All fan modules of the device are in place

and work normally

Red/on: One or more fan modules work abnormally;

one or more fan modules are not in place.

PWR

Red and green

Green/on: The device has at least one power module in

place and the in-place power works normally.

Red/on: The in-place power module of the device has

alarm.

Power button light

green

green/on: The device is powered on.

green/slow-flashing 0.2Hz: The device is in the standby
state.

A.6

Power Module Specification

S12800 route switch supports the AC power supply mode.

The power module has the following specification:

Specification

Overview

Содержание S12800








































































































































Результаты поиска

Содержание S12800

Отзывы:

Похожие инструкции для S12800

Бренды по названию

Популярные бренды

Maipu S12800, Руководство по установке

Результаты поиска

Содержание S12800

Отзывы:

Похожие инструкции для S12800

Бренды по названию

Популярные бренды